Smart Wi-Fi Water/Gas valve controller

Reference 1939

With dimensions of 15.5x10.5x10.5x10.5 centimetres, this intelligent valve up to 1 1/2 inches (3,81cm) controller is used to open and close stopcocks remotely, which can improve home security and prevent possible leaks.

Thanks to its 2.4Ghz Wi-Fi technology, which allows the device to be paired with the "Smart Life" mobile application, it can control the opening and closing of the valves, as well as operating time programmes.

The pairing of the controller with the mobile application is very simple since once you connect the product to the power supply via the AC/DC adapter, the Wi-Fi function will be activated automatically allowing you to link the device to the application. From the Smart Life app itself, you can set up "scenes" so that other devices in your smart home can be activated automatically once the controller opens or closes the valve. It is also compatible with Amazon Alexa and Google Home.

This device has a power button on the top with which you can perform the pairings, as well as manually control the stopcock


INSTALLATION METHOD:

1. Install the clamp to the valve controller.
2. Attach the clamp to the water or gas pipe.
3. Adjust the position of the valve controller. Make sure that the handle of the valve controller fits correctly with the stopcock. Also make sure that the controller and pipe handles are in the same direction so that they can make the correct travel.
4. Tighten the screws on both ends of the clamp. Once you have the controller installed, pull down on the ring and check the pipe handle travel.
5. Tighten the screws on the controller handle to secure it to the stopcock.
6. In the event that the power is switched off, by pulling the ring on the bottom of the controller you can move the handle to open or close the stopcock.

OPERATION:

1.  Attach the controller to the water or gas valve and connect it to the power by means of the AC/DC adapter.
2.  Once it is switched on, the blue LED will light up and you can control the device manually by pressing the red button.
3.  To activate the pairing mode of the controller, press and hold the red button until the blue LED starts flashing.
4.  Use the Smart Life or Tuya (Android/iOS) application and pair the controller. Once pairing is complete, the blue LED will stop flashing and turn off, so you can now control the valves remotely.