Living Room Lighting

•     LED strip direct to 220v. Direct without transformers.
•     Complete kit with 5m of strip, remote control, controller and 4 connectors.
•     Controller regulates from 5m to 100m of 220v LED strip and from 30% to 100%.
•     120 LED/meter.
•     CRI 80. BIN A2.
•     Can be cut every 10cm. No light losses.
•     Waterproof IP65.

•     LED strip direct to 220v. Direct without transformers.
•     Complete kit with 5m of strip, radiofrequency remote control, controller and 4 connectors.
•     Remote control with batteries. Approximate range of 15m.
•     Can be cut every 12,5cm. No light loss.
•     Waterproof IP65.

•     Ideal solution for both home and office use.
•     Cut Ø80mm. Measurements 92x92x25mm.
•     Tilting angle: 30º.
•     White lacquered aluminium. High quality.
•     Bulb not included.

•     High luminosity. With only 7w it gives 630 lumens.
•     Saves more than 85% in electricity consumption.
•     Fat E27 thread, perfect for replacing conventional bulbs up to 75w.
•     Its opal diffuser reduces glare to a minimum.
•     High quality lighting with a CRI +80.
•     Ecological product, does not contain lead or mercury. Complies with Rhos hazardous substances regulations.

•     White thermo-lacquered aluminium frame
•     Dimensions 600x300x60mm
•     Easy installation by quick assembly
•     Fixing with screws

• Easy installation by quick assembly
• Standard dimensions of 1200x600x45mm
• Panel not included
• Fixing of the frame with clip

WHITE THERMO-LACQUERED RECESSED FRAME FOR 60X60 PANELS

DIMENSIONS 635X635mm

EASY INSTALLATION BY QUICK ASSEMBLY WITH STAINLESS STEEL SCREWS.

•     White thermo-lacquered surface frame for 60X60 panel
•     Dimensions 600X600X45mm
•     Easy installation by quick assembly
•     Fixing of the frame by clip

•     Easy installation by quick assembly
•     Panel not included
•     Fixing of the structure by clip

•  LED constant current power supply for use with LED panels and LED ceiling lights.
•  Input voltage AC85-265V -50/60Hz, output voltage DC54-72V 260mA +-5% input power: 14-20W.
•  Easy installation: with wires and connector for installation.
•  Full certificates: CE, RoHS.

• Easy installation: with cables and connector for installation.
• Fully certified: CE, RoHS.

• 5m roll of RGB strip to extend the LED length of the complete kit (model 1752).
• LED strip direct to mains 220v. Up to 100m direct without transformers.
• Allows to extend 5m lengths with the supplied connector.
• Multiple colour and flash modes with ATOMANT RGB LED controller (model 1850), not included.
• No transformer required.
• LED type: SMD 2835

• Circular tube with direct connection without any modification
• Quality product
• 225 mm standard ready to install directly to the mains.
• 1200 lumens; more light than fluorescent and no lag or flickering

• Pack 2x circular tube with direct connection, without any modification
• High quality product
• 300 mm and 225 mm standard ready to install
• 30000 hours; more light than fluorescent and no delay or flicker.

• Maximum power 7w and 680 lumens at 120 degrees of aperture.
• The GU10 with exceptional value for money.
  
• Aluminium body. CRI 80. UGR 19. Pf: 0.90.
• No shadows and wide angle.

• MR16 at 12/24V 7W for use with transformer (not included).
• Suitable for use in wet areas where safety regulations do not allow the use of 220V.
• Dimmable.
• More light than a traditional 50w halogen lamp.
• BI PIN

• [Dimensions] Ø50x56mm, GU10 base. 8W, 800 lumens, and 120º beam angle.
• [Versatile] Especially designed for professional environments: offices, workspaces, commercial premises, or hospitality establishments. Its high versatility also makes it perfectly suitable for home use.
• [High-quality lighting] Light intensity of 800 lumens projected at a 120-degree beam angle. It features an opal anti-glare diffuser that ensures proper light distribution, prevents glare, and provides a pleasant light to the eyes. A color rendering index of +80 CRI ensures accurate color reproduction.
• [Energy Saving] Designed to replace traditional bulbs, typically 80W. Using our LED bulbs provides energy savings of over 80% compared to traditional lighting.

•     GU10 at 120 Degrees

• Dimensions: Ø92x25mm, Ø80mm cut.
• The design is adjustable and with a tilting angle of 30º.
• Made of aluminum with white lacquered finish.
• Suitable only for LED bulbs, since the high temperatures that conventional halogen bulbs can reach could cause serious damage. It is not designed to withstand temperatures above 60º.
• Ideal for home and commercial use: living room, hallway, bedroom, shopping malls, hotels, restaurants, offices.

• Circular Tube with direct connection without any modification
• Free technical service by telephone.
• 300mm STANDARD ready to install.
• 1800 lumens! More light than fluorescent and no delay or flicker.