- Adjustable brightness. On time 2 minutes.
- Ideal for stair landings, doorways and corridors.
- The twilight movement detector designed to automate lighting.
- Detects movement and lack or excess of light to switch the bulb on or off.
- LED compatible.
Wall Motion Detector 140º LED Compatible
MF1149
More info about this product
- Suitable for stair landings, doorways and corridors
- For use with LED bulbs
- Detection distance 7-10m. Detection time adjustable from 8s to 10min
- Angle 140 degrees
See more
(editar con el módulo de Información de seguridad y confianza para el cliente)
(editar con el módulo de Información de seguridad y confianza para el cliente)
(editar con el módulo de Información de seguridad y confianza para el cliente)
Guarantee safe & secure checkout
The presence detector with motion sensor is an automatic motion switch. The detector is activated when it detects movement within its reception field and is deactivated after an adjustable delay of between 8 seconds and 10 minutes when it stops detecting movement.
It has a detector with adjustable light sensitivity between 3-2000 lux, the operation of the sensor can be adjusted for each type of ambient lighting. If we adjust the LUX function towards the sun or day mode, it will work according to the lux setting chosen both day and night, on the other hand if we adjust it in the LUX function towards the moon or night mode, it will only work at night.
It is used to place it embedded in the wall with a detection area of 140º, we recommend installing it at a height of between 2 and 4 metres for correct operation and to avoid detection problems due to an obstacle. It has a maximum detection distance of 10 metres. The nominal voltage with which the detector works is 230V/50Hz.
It has an IP20 protection rating and is suitable for indoor use with a maximum admissible power of 200W (incandescent) and 50W (LED).
The dimensions of the product are 80x80x35 millimetres and 50 millimetres of cut-off.
The connection of this detector is recommended for LED lighting and always making the connection by means of the two wires.
The detector is an ideal element for zones where you want to automate the lighting, start up electronic devices when they detect movement, such as staircases, basements, doorways, offices, libraries, school classrooms, bathrooms, etc.
Benefit from the best prices and offers on the market in our Atomant LED lighting online shop.
Data sheet
- Measurements
- 80x80x35mm
- Protection
- IP20
- Installation
- Recessed
- Aperture
- 140º
- Information
- Maximum detection distance 10m
Specific References
- ean13
- 8436586848200
en la detección de movimiento, se podría mejorar.
Esta todo bien
cumple perfectamente su funcion
Usado en un pasillo y un recibidor, es practico para lugares de paso, no creo que fuese muy buena opcion, para estancias donde tienes que estar mas de 2 o 3 minutos.
Questions
Be the first to ask a question about this product!